REMINGTON 700 PREFIT BARREL-HEAVY VARMINT

SKU:
prefit-6BR124
$249.00
(4 reviews) Write a Review
Width:
4.00 (in)
Height:
32.00 (in)
Depth:
4.00 (in)
Current Stock:
Minimum Purchase:
1 unit

Presenting the Urbanrifleman Remington 700 prefit. 

All barrels are manufactured from Wilson Arms stainless steel blanks.  Fully chambered and ready for the user to headspace and shoot.

ALL BARRELS ARE STAINESS STEEL WITH BRUSHED FINISH.

  1. All barrels are 1-8 twist.
  2. All barrels are 26" long.
  3. All barrels are the typical Savage heavy varmint contour approximately .865 at the muzzle.
  4. All barrels will fit any standard Remington 700.

Includes only the barrel.  Barrel nut, recoil lug, headspace gauges, etc etc will have to be purchased seperately.

SOME CALIBERS ARE MADE TO ORDER AND REQUIRE TWO WEEKS.

Reviews

  • 5
    6mm x 223 AI

    Posted by Richard May on Nov 17th 2021

    I now have 3 Remage barrels from The urban rifleman all 8 twist heavy varmint contour in 6mmbr, 223 AI and most recently 6mm x 223 AI. All 3 shoot much well than I can, clean very easily, and group below .5 or .6 MOA without much reloading effort. Bore scope exam is very good by my untrained eye. Very happy with all three barrels!!! Thanks

  • 5
    700 6bra prefitt

    Posted by Treece on Sep 24th 2021

    Soon as I got my barrel headspaced. I shot a .450' group. Shots 6,7,8,9,10. Barrel profile is perfect too. Thanks for there being people out there willing to help. Urban Rifleman!

  • 5
    REMINGTON 700 PREFIT BARREL-HEAVY VARMINT

    Posted by Adam on May 23rd 2021

    I got the 6mm bra with 104 freebore. I was able to install this myself with a little help from my local gunsmith. Bradly was able to help over the phone on how to headspace using the standard 6mm br go gauge . The barrel shot sub moa groups at 200 yards while fire forming brass.

  • 5
    Couldn't find what I was looking for, So we built one instead.

    Posted by Dan Bowers on Feb 28th 2021

    So here it is late January 2021, And who knows what will lie ahead of us under the new Biden Administration. Parts are getting tuff to find, So I decided it was past time to put a Remington 700 based 223 rifle together. Brad helped me get all the parts sourced and he handed the barrel and specs I wanted. Then came the length, He was just finishing up getting his lathe put together and tells me this was his first barrel that we cut at 20" And had his thread it for 1/2"-28". Here it is March 1st on a 50° NE Ohio day and this rifle is definitely all I wanted it to be. And the 1:8 Twist 223 Wylde chamber loves my go to load of 55gr Hornady V-Max loads that nearly all of my other (AR's) like. Im very happy with this prefit Remage barrel and how well it all came together. Thank You Brad for helping me get this all together in this uncertain time in the 2nd Amendment industry.